Resistance is mounted in a transparent box with terminals on its top. Module is ideal for use in electronic circuits where a fixed value resistor is required. A wide range of resistors is available.
Box dimensions: 5.4 x 4.2cm (L x W) approx.
All are ½ Watt M.F.R, Acc. 1%
NOTE: Other ranges are also available as per requirement.
Cat No. | Resistance Ω |
SW352 | 1 |
SW353 | 5 |
SW354 | 10 |
SW355 | 20 |
SW356 | 50 |
SW357 | 100 |
SW358 | 200 |
SW359 | 500 |
SW360 | 1000 |
Diode/ transistor is mounted in a transparent box with terminals on its top. Module is ideal for use in electronic circuits where a component of some particular specification is required. A wide range of diode/ transistor is available.
SW297 - Transistor P-N-P
SW298 - Transistor N-P-N
SW361 - Si - Diode
SW362 - Ge - Diode
SW363 - Zener Diode
Box Dimension: 5.4 x 4.2cm
Available on Request:
Capacitor, Resistance and Diode in a box can be made available with safety sockets.
SA622 Transistor P-N-P
SA623 Transistor N-P-N
SA642 Light Dependent Resistor
SA643 P-N Junction Diode
SW363 Zener Diode
Capacitor is mounted in a transparent box with terminals on its top. Module is ideal for use in electronic circuits where a fixed value capacitor is required. A wide range of capacitors is available.
Box Dimension: 54x42mm (l x w) approx.
Cat No. | Capacity | Operating Voltage |
SW372 | 1 µF | 25V |
SW373 | 0.47 µF | 25V |
SW374 | 0.22 µF | 25V |
SW375 | 0.1 µF | 25V |
SW376 | 47 nf | 25V |
SW377 | 22 nf | 25V |
SW378 | 10 µF | 25V |
SW379 | 4.7 µF | 25V |
SW828 | 2.2 µF | 25V |
SW381 | 1 nf | 25V |
NOTE: Capacitor of other working voltages are also available as per requirement.
Seven numbers of different resistances 1Ω/ 1/4W, 4.7Ω/ 1/4W, 10Ω/ 1/4W, 100Ω/ 1/4W, 1000Ω/ 1/4W, 10000Ω/ 1/4W, 100000Ω/ 1/4W mounted on acrylic base. Each resistances provided with two numbers of 4mm sockets.
Single pole changeover reed relay housed in a plastic box capable of up to 400 changeovers per second. Used with parallel plate capacitor,10mF. Sockets 4mm. Supplied without power supply & signal generator. Box : Plastic, 100 x 75 x 40 mm (L x W x H)
It consists of a phototransistor mounted on a plastic box with 4mm sockets; with transistor symbol printed (Base, collector, emitter indicated). Box: plastic, 13.8 x 10.4 x 4cm (approx.)