CELL HOLDER
Plastic moulded holder with brilliant finishing to hold cell of 1.5 volt, big size. Individual units can be joined in a tandem to make a battery of required voltage. Sockets of 4mm are provided on the cell holder.
Dimensions: 74x38mm (L x W), Single holder
SE953 For Single cell
SE952 For Double cell
SE878 For Four cell
TWO BATTERY HOLDER WITH PLUG TERMINALS SO598
Provided with one no. 4mm red terminal and two nos. of 4mm black terminals. Provision for holding (2 x 1.5V) dry cells. Maximum capacity 3V.
FOUR BATTERY HOLDER WITH PLUG JACKS SO597
Provided with one no. 4mm red terminal and four nos. of 4mm black terminals. Maximum capacity 6V. Provision for holding (4 x 1.5 V)dry cells.
KNIFE SWITCH DOUBLE POLE (PLASTIC BASE) SN730
It consists of double pole knife switch mounted on a plastic base with rubber feet and 4mm terminals facilitating connection by 4mm plug leads or bare ended leads. Base: Plastic, 165 x 100 mm
FLEXIBLE PLUG LEAD GUN TYPE
| Cat. No. | Length | Colour |
| SN200 | 500mm | Black |
| SN201 | 1000mm | Black |
| SN202 | 2000mm | Black |
| SN203 | 500mm | Red |
| SN204 | 1000mm | Red |
| SN205 | 2000mm | Red |
| SN206 | 500mm | Yellow |
| SN207 | 1000mm | Yellow |
| SN208 | 2000mm | Yellow |
CONTACT KEY SE967
PLUG KEY, ONE WAY SH108
Consists of two brass blocks with socket terminals mounted on an insulated base. Contact is made by a tapered plug with an insulating top. Base size: 100x62mm
SWITCH ON/OFF SV011
Toggle switch ON/OFF is mounted on acrylic base with 4mm sockets.
SWITCH IN PLASTIC BASE SN796
It consists of on/off switch mounted on a plastic box, with switch symbol printed. Provided with 4 mm safety sockets. Base: Plastic, 100x75x40 mm (l x w x h).