MAGNETIC FILED ALONG THE AXIS SED1001
Exp-1 To study Biot-Savart’s law.
Exp-2 To study the magnetic field along the axis of a current carrying multiturn coil.
Exp-3 To study the dependancy of magnetic field on coil diameter and number of turns.
- Modular approach.
- Multipurpse power supply.
- Multiturn coils of various diameters.
- Magnetic field measurement with axial probe.
- Electrical safety tested.
- Experiment can be performed at low current.
- Biot Savart's law.
- Magnetic flux density.
- Induction.
- Wire loop.
- Magnetic field.
Principle and Working:
A current carrying coil produces a magnetic field along its axis which is defined by Biot Savart’s law.
In the present setup, the study of magnetic field along the axis is investigated with coils having different dimensions and turns. The magnetic field is measured using a axial hall probe and digital gaussmeter.
Contents:
| Cat. No. | Item Name | Qty. |
| SE079 | Power supply DC 0-16V, 5 Amp | 1 |
| C4939 | Digital gauss meter with axial probe | 1 |
| SW658 | Laboratory jack 200x200mm | 1 |
| SG110 | Cylindrical base | 1 |
| C4238 | Axial probe holder | 1 |
| SN200 | Lead 50cm black | 1 |
| SN203 | Lead 50cm red | 1 |
| SN201 | Lead 100cm black | 1 |
| SN204 | Lead 100cm red | 1 |
| CD074 | Coil N=165, L=75mm, dia=32mm | 1 |
| CD075 | Coil N=220, L=100mm, dia=32mm | 1 |
| CD076 | Coil N=275, L=125mm, dia=32mm | 1 |
| CD077 | Coil N=165, L=75mm, dia=40mm | 1 |
| CD078 | Coil N=220, L=100mm, dia=40mm | 1 |
| CD079 | Coil N=275, L=125mm, dia=40mm | 1 |
| SP141 | Meter ruler | 1 |
| SG454 | Clamp (C type) | 2 |
- Power Supply 0-16V, 5A SE079
-
SPECIFICATIONS Voltage : 0-16V DC continuously variable & stabilized
Voltage display : 3½ digit LED
Ripple : Less than 25mV
Overload : Current limiting protection
Current : 5 A continuously variable, 10% to full rating
Current display : 3½ digit LED
Working voltage : 230V AC, 50 Hz single phase
-
- Digital Gauss Meter C4939
-
SPECIFICATIONS Range : 200 G & 2 kG
Resolution : 1G at 0 - 200G
Offset : By Potentiometer to set ZERO
Display : 3½ Digit LED
Power : 220 V, ±5%, 50 Hz AC
Axial Hall probe : InAs
-
- Induction Coil Sets
-
SPECIFICATIONSMaterial : Copper Cat No. OD(mm) L (mm) N R (Ω) L (mH) I max CD077 40 75 165 0.7 0.5 2A CD078 40 100 220 1 0.71 2A CD079 40 125 275 1.2 0.91 2A CD074 32 75 165 0.6 0.36 2A CD075 32 100 210 0.8 0.51 2A CD076 32 125 275 1 0.66 2A
-
- Cylindrical Base SG110
-
SPECIFICATIONS Material : Ferrous
Mount : Rod 10-14mm dia
: Flat object up to 10mm
Groove : Slide object, 30x10mm (LxW)
-
- Wooden Scale SP141
-
SPECIFICATIONS Length : 100mm
Accuracy : 1mm
-
- Laboratory Jack SW658
-
SPECIFICATIONS Material : Aluminium
Top plate (LxW) : 200x200mm
Static load : 20kg
Vertical elevation : 65-260mm
-
- Clamp SG454
-
SPECIFICATIONS Material : Cast iron
Paint : Black powder coating
Length : 75mm
Clamping : Threaded knob
-
Electricity & Magnetism Experiments
- Ring Launcher
- Microwave Optics System
- Field Lines and Equipotential Lines
- Dielectric Constant
- Permeability & Permittivity of Air Experiments
- Faraday's Law & Induced E.M.F.
- Magnetic Field in Helmholtz Coil
- Biot Savart's Law
- Magnetic Field along the Axis
- Superconductivity Experiment Kit
- Dia-Para-Ferromagnetism
- Study of BH-Curve with Deep
- Quincks Tube Method