STUDY OF BH-CURVE WITH DEEP S1010
Exp-1 To study BH-Curve.
Exp-2 To study permeability curve
- Auto identification of sensors
- High speed data transfer
- Programmable delay in data acquisition
- Programmable sampling frequency
- Graphical Analysis
- Automatic & manual mode of demagnetization
- Magnetic induction.
- Magnetic flux.
- Magnetic field strength.
- Hysteresis.
- Remanence.
- Coercive.
Principle and Working:
A Magnetic field is generated in a U & I shape iron core by continuous (Sin or Triangular) wave to primary coil which generates the magnetic field strength H as
H=(N1/L).I1
where L: Effective length of iron core, N1: Number of turn.
The corresponding magnetic induction B is obtained through integration of the voltage V induced in second coil as:
B=(1/N2.A). ∫V.dt
where A: Cross-section of iron core, N2: Number of turn.
In the present setup, the magnetization curve and Hysteresis curve as function of the magnetic field strength H is plotted.
Contents:
| Cat. No. | Item Name | Qty. |
| C1713 | DEEP_ BH Software | 1 |
| CD433 | Data Logger with Current Booster | 1 |
| C7994 | Power Unit | 1 |
| CD861 | Voltage Sensor ± 1V | 1 |
| CD860 | Current Sensor ± 1A | 1 |
| C0608 | I Core | 1 |
| SW178 | Coil 300 turns(pair) | 1 |
| CD511 | Resistance Module 10Ω , 10 W | 1 |
| C0610 | U Core | 1 |
| LP18 | Flexible lead (100 cm) | 4 Set |
| R9964 | USB Cable | 1 |
* Additionally Required
Computer not supplied with this setup.
- Data Logger & Power Unit
-
SPECIFICATIONS Data Logger CD433
Input channels : 4, 6PIN BT (British Telecom)
Input channels resolution : 12 bit ADC @ 100 ksps
Analog input : 0-5 V
Output channels : 12 bit DAC
Analog output : ± 12 V max 10 mA
Current booster : Upto 1 A
Power Connector : 3PIN DIN
Communication : USB
POWER UNIT C7994
Power Supply Input Voltage : 220V, 50Hz AC
Power Supply output Voltage : ± 12 V, 3PIN DIN
-
- Electromagnet
-
SPECIFICATIONS Coils : 300 turns.
Wire : 19SWG, Cu.
Connection : 4mm safety socket.
U Core : 150x130mm(LxH), 40x40mm cross section.
I Core : 150mm(L), 40x40mm cross section.
Point Pin : Length=90mm
Core material : Ferromagnetic.
-
- Voltage & Current Sensor
-
SPECIFICATIONS VOLTAGE SENSOR CD861
Voltage Sensor : ±10 V
Connection out : 4mm safety socket
Connection in : 6PIN BT (British Telecom)
CURRENT SENSOR CD860
Current Sensor : ±100nA
Connection out : 4mm safety socket
Connection in : 6PIN BT (British Telecom)
-
- Resistance Module CD511
-
Mount : Transparent acrylic housing.
Connection : 4mm safety socket.
Resistance : 10 ohm.
Wattage : 10 watt.
-
Electricity & Magnetism Experiments
- Ring Launcher
- Microwave Optics System
- Field Lines and Equipotential Lines
- Dielectric Constant
- Permeability & Permittivity of Air Experiments
- Faraday's Law & Induced E.M.F.
- Magnetic Field in Helmholtz Coil
- Biot Savart's Law
- Magnetic Field along the Axis
- Superconductivity Experiment Kit
- Dia-,Para-, and Ferromagnetism
- Study of BH-Curve with Deep
- Quincks Tube Method