The BPW34 is a high speed and high sensitive PIN photodiode in a miniature flat plastic package. Due to its water clear epoxy the device is sensitive to visible and infrared radiation. The large active area combined with a flat case gives a high sensitivity at a wide viewing angle.
In the present setup, the photo-diode characteristics in forward bias and reverses bias configuration for fixed irradiation is measured. Also, the dependency of photo-current on different irradiation will be measured.

Contents:

• Power Supply 0-16V, 5V/1A DC SW926
  • 
    SPECIFICATIONS Voltage : 0-16 Volt DC continuously variable & stabilized.
    Ripple : Less than 25mV.
    Overload protection : Current limiting.
    Current : 5 Amp. continuously variable from 10% to full rating.
    Display : Two separate displays(3 digit LED) are provided to monitor the output voltage and load current continuously.
    Working voltage : 230V AC, 50 Hz single phase.
    
• Photodetector SN1016
  • 
    SPECIFICATIONS Detector : Silicon photocell
    Terminals : 4mm safety socket
    Aperture : 1mm
    Rod : 10mm dia.
• Digital Multimeter SE067
  • 
    SPECIFICATIONS Resistance : 200W, 2000W, 20k, 200k & 2000k W.
    D.C.Voltage : 200 & 2000 mV
      : 20, 200 & 600 V
    A.C.Voltage : 200 & 600 V
    D.C.Current : 200 & 2000 mA
      : 20 & 200 mA
      : 10 A
    Testing : Diode & transistor
    Battery : 9V
    
• Cylindrical Base SG110
  • 
    SPECIFICATIONS Material : Ferrous
    Mount : Rod 10-14mm dia
      : Flat object up to 10mm
    Groove : Slide object, 30x10mm (LxW)
    
• Resistance Module SZ039
  • 
    SPECIFICATIONS Resistance : 10 ohm
    Wattage : 10W
    Connection : 4mm safety socket
    

• Study of Resistance, Capacitor, Diode with Labpro
• Study of Resistance, Diode and Transistor with Deep
• Electronic Plug in Kit (Combined)
• Electronic Plug in Kit (Individual)
• Hall Effect
• Study of P-N Junction & Energy Band Gap
• Pin Diode Characteristics